Click on the image to check the artwork
1. Use Principle
It is used on all kinds of offset machine. With the ink, first print image on paper, then transfer the image onto various materials by heat transfer press, especially for polyester fabric. Under high temperature, the ink will become gas and go into fabric.2. Use Scope Suitable for sheet-fed monochrome machines, color or multi-color offset press. (one color, two color and four color machines).
3. Colors
CMYK (Cyan, Magenta, Yellow and Black).
4. Transfer Paper
Coated paper, offset paper, chrome paper and cardboard paper.Transfer paper should be 80-90 gr/m2 with dimensional stability.
5. Suitable Fabrics
Polyester fabric, Triacetate fabric, Nylon fabric, Acrylic fabric, Polypropylene nitrile. (All kinds of synthetic fabrics).
6. The printing process just needs 3 steps
(1)Print the image on paper, and normal paper is ok.
(2)Put the printed paper on substrate, such as polyester and nylon fabric.
(3)Put the paper and fabric on the heat-transfer machine. When the temperature reaches 180-220°C, the image will be transfer printed from paper onto the substrate.
7. Product Characteristics
* No Crust
a.Granula size is less than 5 micron.
b.No crust in 28-30 days (open the cover) at normal temperature.
* Safety
Passed SGS,DGM,MSDS,totally environment-friendly!
* Advantage
Good stability on the machine,clear dot reproduction,excellent ink-water balance.
Be able to adapt to the demand for middle-speed or high-speed printing.
During the normal condition, use the ink on the machine directly.
*P.S. please make samples before the final printing to confirm the exactly image.
8. Notice
Since sublimation ink belongs to gas shading, then the colour showing on paper and the colour showing on fabric are different. So when we make PS-plate, the CMYK ratio is different from normal offset plate making.
For example:
a. To get 50%C on fabric, the color on paper should be 30%C;
b. To make red PS-plate, the ratio is 100%M and 35%-40%Y;
c. To make blue PS-plate, the ratio is 100%C and 20%M;
d. To make green PS-plate, the ratio is 80%C and 90%Y;
e. If we want to get yellow like Asian skin, the ratio is 10%~11%M, 7%~8%Y and a little cyan.Cyan can be adjusted acooding to the requirement.
9. Transfer Time: 10-30 seconds
10. Transfer Temperature: 180-220 degree
Sublimation transfer ink for fabric printing